Tag: pbx system
By now most technically inclined folks have heard of the Raspberry Pi, the small $35 computer that can do big things. If you are going to buy one, just make sure you get one of the newer models with 512 MB of memory, rather than an older model with only 256 MB.
But, you may wonder, can I run a decent PBX system (one that won’t get in my way and treat me like a blithering idiot while I’m attempting to configure it) on a computer this small? Well, it turns out that people are doing just that:
The following guide is a relatively easy way to install FusionPBX and FreeSWITCH with the Ubuntu/Debian script.
Raspberry Pi Script (FusionPBX Wiki)
EDIT April, 2017: For a newer method see this DSLReports thread.
It should be obvious that you’ll probably find this easier if you know a bit about the Raspberry Pi first (Google it) but if you want a reliable and configurable PBX, and you think you have the skills to follow these instructions and make it work, I’d definitely give it a try. Besides, for home users, it’s a lot easier to justify a separate computer just to handle your phone calls if it’s small, cheap, and unobtrusive, and has low power consumption.
- Using YATE to overcome Google Voice issues in FreeSWITCH and Asterisk (tech.iprock.com)
- Raspberry Pi gets a RAM upgrade. (technowdaily.com)
- BIG NEWS! Open Source ARM userland on Raspberry Pi #raspberrypi @Raspberry_Pi (adafruit.com)
- Raspberry Pi graphics code is now open source (liliputing.com)