Tag: Growl

Links: OS X Notifier App Growl Goes Closed Source, but a free forked version (that works in Lion) is available

 

Important
This is an edited version of a post that originally appeared on a blog called The Michigan Telephone Blog, which was written by a friend before he decided to stop blogging. It is reposted with his permission. Comments dated before the year 2013 were originally posted to his blog.

Here’s a few links on this issue:

OS X Notifier App Growl Goes Closed Source (Slashdot)

Episode 47 – Fork You Growl! Interview with Perry Metzger (from The Basement Coders Developer Podcast — if you care at all about Growl you should listen to this, preferably before spending any money on their allegedly broken App).

[growl-discuss] Growl 1.2.x for Lion source for XCode 4.1 (including a fixed HardwareGrowler)

Patched version project page on bitbucket

Download page for forked version

Growl-1.2.2f1.dmg direct download link (if it doesn’t work check the link above — there may be a newer version).

EDIT: Link to Growl Source Installation information for Growl 1.3 — it appears that after the Slashdot article was published, the Growl developers decided to release the source to Growl 1.3 (making the headline of the Slashdot article and this article inaccurate in the process).  However, this does not mean that the problems with the new version have been fixed (as of the date of this article) — it probably only means that they didn’t like the bad publicity about not releasing the source and decided to address that issue, in an attempt to blunt some of the criticism.

I’m presenting the above links so that anyone interested can check them out (and so I can find them again in the future). I will just say that I generally agree with the sentiments expressed in the podcast. I think it’s really underhanded when a project that has been free for years (and has accepted contributions of both cash and code from folks that probably thought it would be free forever) tries to go commercial, and it’s even worse when the commercial app doesn’t work as well as the previous free version.  And I won’t even get into the issue of the censorship, because the Growl developers have the right to censor whomever they want in their forums, but in this case it sure sounds like they were trying to deprive their users of the knowledge that someone else had fixed their buggy code and made it freely available.  If they choose to do that, then it’s up to others (like you and I) to let Growl users know that an alternative exists.

I hope that either the forked version gains acceptance (and exposure, since few people seem to know about it at the moment) or the original Growl developers see the error of their ways sooner rather than later. What IS it with developers turning greedy lately?  Keep in mind that had Growl not existed (and worked so well in its previous free incarnation), it’s quite likely that the Apple folks would have developed their own notification system and made it a component of OS X.

EDIT:  Two things you should know about Growl 1.3 before you fork over your two bucks:  First, due to App Store requirements, it no longer installs as a preference pane in System Preferences – it’s now an application (the podcast explains this in more detail).  And second, “Growl 1.3 and later do not have update checkers built into them, so you will need to keep up with when releases are put out”, according to the Growl Source Installation page.

Full disclosure:  I also censor comments — see my comment policy in the right sidebar — but it’s generally because they are spam or include one or more links that I consider spam, or because someone is being rude and nasty.  You can call me all the names you like, but I’m not going to approve such garbage for others to read.  However, there are right reasons and wrong reasons to censor comments or to ban a user, and I’ll leave it to the reader to decide (after listening to the linked podcast, which I strongly recommend before you form any strong opinions on this) whether the Growl folks should have banned Mr. Metzger.

A Perl script to send Caller ID popups from Asterisk to computers running Notify OSD (such as Ubuntu Linux) or any command-line invoked notification system

 

Important
This is an edited version of a post that originally appeared on a blog called The Michigan Telephone Blog, which was written by a friend before he decided to stop blogging. It is reposted with his permission. Comments dated before the year 2013 were originally posted to his blog.

This is basically an update to my article, A Perl script to send Caller ID popups from Asterisk to computers running Growl under OS X on a Mac or Growl for Windows, and you should still use that article if you are sending notifications to a computer on your local network that runs Growl or Growl for Windows as the notification system.

I wanted to find a way to send Caller ID popups to a Ubuntu Linux box, and in the process I discovered a different method of sending such notifications.  There are pros and cons to using the new method, so let me explain those first:

Pros:

  • Can send notifications to any computer that supports command line generated notifications (so it could also be used with Growl, if you can use growlnotify from a command prompt to generate a notification).
  • Can send notifications to any computer that you can SSH into, provided you have it set up to use public/private key authentication rather than password authentication.

Cons:

  • Notifications typically display a couple of seconds later than under the previous method.  I suspect this is due to the SSH authentication taking a second or two.
  • It’s a little bit more complicated to set this up, though not horribly so.
  • Because this uses SSH and requires that Asterisk be granted permission to establish an SSH connection as the super user (by using sudo), there may be unforeseen security risks.

Read that last point again, and please understand that as with all projects on this site, I offer this for experimental purposes only.  I explicitly do not warrant this method as being 100% secure, nor will I tell you that it could not be exploited to do bad things on your system.  I don’t think it can (and feel free to leave a comment if you think I’m wrong), but I just don’t know that for sure.  So, if you decide to use anything in this article, you agree to assume all risks. If you’re the type that likes to sue other people when something goes wrong, then you do not have permission to use this code.  We’re all experimenters here, so no guarantees!

As with the previous method, you must have the Perl language installed on your Asterisk server, and you must have the Asterisk::AGI module installed (I’m going to assume you know how to install a Perl module from the CPAN repository – if you have Webmin installed, it can be done from within Webmin). Chances are you already have Asterisk::AGI installed, unless you built your Asterisk server “from scratch” and never installed it.

There’s one additional thing you must do on the Asterisk server before this will run, and that’s allow Asterisk to run the ssh command as root. So, add this to your /etc/sudoers file (probably at the very end, but in any case it should be obvious where to add this because it will be in a section where Asterisk is granted similar privileges with regard to other programs):

asterisk ALL = NOPASSWD: /usr/bin/ssh

Next you want to copy and paste the following Perl script to the filename /var/lib/asterisk/agi-bin/notifysend.agi on your Asterisk server (to create a non-existent file, you can use the touch command, and after that you can edit it in Midnight Commander or by using the text editor of your choice). If this code looks somewhat familiar, it’s because it’s adapted from some code that originally appeared in a FreePBX How-To, which I have modified.

#!/usr/bin/perl
use strict;
use warnings;
use Asterisk::AGI;
my $agi = new Asterisk::AGI;
my %input = $agi->ReadParse();

# Next two lines fork the process so Asterisk can get on with handling the call
open STDOUT, '>/dev/null';
fork and exit;

my $num = $input{'callerid'};
my $name = $input{'calleridname'};
my $ext = $input{'extension'};
my $user = $ARGV[0];
my $ip = $ARGV[1];

if ( $ip =~ /^([0-9a-f]{2}(:|$)){6}$/i ) {
    $ip = $agi->database_get('growlsend',uc($ip));
}

# OMIT this section if you don't want IP address
# checking (e.g. you want to use foo.bar.com)
unless ( $ip =~ /^(d+).(d+).(d+).(d+)$/ ) {
    exit;
}

if ( $ARGV[2] ne "" ) {
 $ext = $ARGV[2];
}

my @months = (
    "January", "February", "March", "April", "May", "June",
    "July", "August", "September", "October", "November", "December"
);
my @weekdays = (
    "Sunday", "Monday", "Tuesday", "Wednesday",
    "Thursday", "Friday", "Saturday"
);
my (
    $sec,  $min,  $hour, $mday, $mon,
    $year, $wday, $yday, $isdst
) = localtime(time);
my $ampm = "AM";
if ( $hour > 12 ) {
    $ampm = "PM";
    $hour = ( $hour - 12 );
}
elsif ( $hour eq 12 ) { $ampm = "PM"; }
elsif ( $hour eq 0 )  { $hour = "12"; }
if ( $min < 10 ) { $min = "0" . $min; }
$year += 1900;
my $fulldate =
"$hour:$min $ampm on $weekdays[$wday], $months[$mon] $mday, $year";

# Next two lines normalize NANP numbers, probably not wanted outside of U.S.A./Canada/other NANP places
$num =~ s/^([2-9])(d{2})([2-9])(d{2})(d{4})$/$1$2-$3$4-$5/;
$num =~ s/^(1)([2-9])(d{2})([2-9])(d{2})(d{4})$/$1-$2$3-$4$5-$6/;

my $cmd = qq(./remotenotify.sh "$name" "$num calling $ext at $fulldate");
$cmd = "sudo ssh $user@$ip '$cmd'";
exec "$cmd";

Also, if you want to be able to specify computers that you wish to send notifications to using MAC addresses rather than IP addresses (in case computers on your network get their addresses via DHCP, and therefore the IP address of the target computer can change from time to time), then you must in addition install the following Perl script (if you have not already done so when using the previous method). Note that if you have a mix of computers on your network and you are using both the new and old methods, you only need to do this once — it works with both methods (hence the reference to “growlsend” in the database and “gshelper” as the name of this script). Call it /var/lib/asterisk/agi-bin/gshelper.agi and note that there is a line within it that you may need to change to reflect the scope of your local network:

#!/usr/bin/perl
use strict;
use warnings;
my ($prev, @mac, @ip);
# Change the 192.168.0.0/24 in the following line to reflect the scope of your local network, if necessary
my @nmap = `nmap -sP 192.168.0.0/24|grep -B 1 MAC`;
foreach (@nmap) {
    if (index($_, "MAC Address:") >= 0) {
        @mac = split(" ");
        @ip = split(" ",$prev);
        `/usr/sbin/asterisk -rx "database put growlsend $mac[2] $ip[1]"`;
    }
    $prev=$_;
}

Make sure to modify the permissions on both scripts to make them the same as other scripts in that directory (owner and group should be asterisk, and the file should be executable), and if you use the gshelper script, make sure to set up a cron job to run it every so often (I would suggest once per hour, but it’s up to you).

Now go to this page and search for the paragraph starting with, “After you have created that file, check the ownership and permissions” (it’s right under a code block, just a bit more than halfway down the page) and if you are using FreePBX follow the instructions from there on out (if you are not using FreePBX then just read that section of the page so you understand how this works, and in any case ignore the top half of the page, it’s talking about a different notification system entirely). However, note that the syntax used in extensions_custom.conf differs from what is shown there, depending on whether you are specifying an IP address or a MAC address to identify the target computer.

First, if you are specifying the IP address of the target computer, then instead of using this syntax:

exten => ****525,1,AGI(growlsend.agi,192.168.0.123,GrowlPassWord,525)

You will need to use this:

exten => ****525,1,AGI(notifysend.agi,username,192.168.0.123,525)

Note that username is the account name you use when doing an ssh login into the destination system, and it should also be the desktop user on the system (not root!). Let’s say that the system is currently at IP address 192.168.0.123. In order for this to work, you need to be able to ssh into your Ubuntu box from your Asterisk server, using the following command from the Asterisk server’s command line:

ssh username@192.168.0.123

If it asks for a password, then you need to follow the instructions at Stop entering passwords: How to set up ssh public/private key authentication for connections to a remote server, and get it set up so that it will not ask for a password (if you don’t like my article, maybe this one will make it clearer).

It’s probably easiest to configure each computer that is to receive notifications to use a static IP address. But note that if you use the above code and have the gshelper.agi program running as a cron job, then after the first time it has run while the computer to receive the notifications is online you should be able to use a computer’s MAC address instead of the IP address. This only works if you’ve used the modified script on this page, not the one shown in the FreePBX How-To. As an example, instead of

exten => ****525,1,AGI(growlsend.agi,192.168.0.123,GrowlPassWord,525)

as shown in the example there, you could use

exten => ****525,1,AGI(notifysend.agi,username,01:23:45:AB:CD:EF,525)

(the above is all one line) where 01:23:45:AB:CD:EF is the MAC address of the computer you want to send the notification to. Once again, just in case you missed it the first time I said it, this won’t work until the gshelper.agi script has been run at least once while the computer to receive the notifications was online. If for some reason it still doesn’t appear to work, run the nmap command (from gshelper.agi) including everything between the two backticks (`) directly from a Linux command prompt and see if it’s finding the computer (depending on the size of your network, it might be several seconds before you see any output, which is why I don’t try to run this in real time while a call is coming in).

If you are NOT running FreePBX, but instead writing your Asterisk dial plans by hand, then you will have to insert a line similar to one of the above examples into your dial plan, except that you don’t need the four asterisks (****) in front of the extension number, and if it’s not the first line in the context, you’ll probably want to use n rather than 1 for the line designator (and, you won’t be putting the line into extensions_custom.conf because you probably don’t have such a file; instead you’ll just put it right in the appropriate section of your dial plan). In other words, something like this (using extension 525 as an example):

exten => 525,n,AGI(notifysend.agi,username,192.168.0.123,525)

This line should go before the line that actually connects the call through to extension 525. I do not write Asterisk dial plans by hand, so that’s about all the help I can give you. And if you don’t write your dial plans by hand, but you aren’t using FreePBX, then I’m afraid you’ll have to ask for help in whatever forum you use for advice on the particular software that you do use to generate dial plans, because I can’t tell you how to insert the above line (or something like it) into your dial plan.

Now is where it gets just a bit more complicated than in the original method. If you have followed the above instructions, you’ll be able to send the notifications to the remote system using SSH, but there will be nothing there to receive them. So we have to create a small script on the receiving system to do something with the received notifications. That script will vary depending on the receiving system, but it must be named remotenotify.sh and it must be placed in the destination user’s home directory, and don’t forget to make it executable! Here’s one that will work in most Ubuntu installations that have Notify OSD installed:

export DISPLAY=:0
notify-send --urgency="critical" --icon="phone" "$1" "$2"

Those two lines are all you need. On a different type of system (or if you have multiple displays) you may need to or wish to do something different. For example, as I mentioned above, if the destination system is running Growl then your remotenotify.sh script will need to call growlnotify, but beyond that I wouldn’t know what to use there (EDIT: But if the target system is a Mac that is running OS X, a pretty good guess would probably be that you’d only need one line, something like this:

growlnotify -s -p 1 -a Telephone -m "$2" $1

In this case it should make the notification sticky until dismissed by the user, give it a priority of 1 — the default is 0 — and use the application icon from the “Telephone” application if you have it installed. Instead of -a to specify an application’s icon you could use -I followed by a path to an .icns file that contains an icon you want to use.  Type growlnotify –help to see all the growlnotify options.  Oh, and before you can make an SSH connection to a Mac you have to go into System Preferences | Sharing and turn on Remote Login).

The beauty of this approach is that you can make the remotenotify.sh script as simple or as complicated as you need — you could even make it forward a notification to other devices if you wish, but figuring out how to do that is up to you (if you come up with something good, please leave a comment and tell us about it!).

If you’re running Ubuntu on the target system, here’s a few articles you may wish to use to help you get your notifications to look the way you want them to appear:

Tweak The NotifyOSD Notifications In Ubuntu 10.10 Maverick Meerkat [Patched NotifyOSD PPA Updated]
Get Notifications With A Close Button In Ubuntu
Configurable NotifyOSD Bubbles For Ubuntu 11.04: Move, Close On Click, Change Colors And More

If you want to be able to review missed notifications, you may be able to use this (as a side note, why don’t they have something like this for Growl?):

Never Miss A NotifyOSD Notification With “Recent Notifications” GNOME Applet

The idea behind the shell script that runs on the target system was found in a comment on the following article, which may be of special interest to MythTV users:

Send OSD notification messages to all systems on a network

There are links to other original sources throughout the article, so feel free to follow those if you want more in-depth commentary.

Recent Posts

Recent Comments

Archives

Categories

Meta

GiottoPress by Enrique Chavez